Backpressure (`backpressure`)

Emulates the back pressure that is present in a system. backpressure is an asset in the ocpi.core component library. Implementations include the backpressure HDL Worker (backpressure.hdl) and the backpressure RCC Worker (backpressure.rcc). Tested platforms include alst4, centos7, isim, matchstiq-z1 (PL), ml605, modelsim, xilinx13_3, xsim, and Zedboard(PL).

Design

The back pressure component provides the ability to emulate the “back pressure” (resistance or force opposing the desired flow of data through an application) that is present in a system. It is primarily used during the development of an HDL worker, specifically during unit test simulations. Back pressure within an OpenCPI system is a common occurrence that can be a result of resource-loading issues or passing data between containers. Workers must be designed to handle system back pressure without data loss.

A block diagram representation of the implementation is given in Figure 1:

Figure 1: Back Pressure Block Diagram

Interface

<ComponentSpec>

  <!-- 'true'  : MSB of lfsr-15 drives the 'take'.
       'false' : use enable_count to set the enable duty-cycle -->
  <Property Name="enable_select" Type="bool" Initial="true" Default="false"/>

  <!-- Set the duty cycle for 'take'
       1 - constant, 2 (toggle off/on), 3 (1/on, 2/off), 4 (1/on, 3/off)-->
  <Property Name="enable_duty_cycle" Type="ushort" Initial="true" Default="1"/>

  <DataInterfaceSpec Name="in" Producer="false"/>
  <!-- Set the output buffer size to match the input, which may be connected to a port with a protocol-->
  <DataInterfaceSpec Name="out" Producer="true" buffersize="in"/>

</ComponentSpec>

Properties

enable_select: Selects the back pressure scheme to control the “take” from the upstream worker. true uses lfsr-15. false uses the setting in enable_duty_cycle.
- Type: bool
- Access:
  - Parameter: False
  - Writable: False
  - Initial: True
  - Volatile: False
- Default value: false
enable_duty_cycle: Sets the “take” duty cycle. Possible values are:1 = constant (default), 2 = toggle (off/on), 3 = 1/on, 2/off, 4 = 1/on, 3/off.
- Type: ushort
- Access:
  - Parameter: False
  - Writable: False
  - Initial: True
  - Volatile: False
- Default value: 1

Ports

Inputs:

in: 32 bits.
- Protocol: None
- Optional: False

Outputs:

out: 32 bits.
- Protocol: None
- Optional: False

Set the output buffer size to match the input, which may be connected to a port with a protocol.

Implementations

backpressure (HDL)

Application worker HDL implementation with settable runtime configuration parameters that applies back pressure to the upstream worker in the application.
backpressure (RCC)

Application worker RCC implementation that is only a placeholder to fulfill the requirements of the OpenCPI unit test framework. It passes through data without change and should not be included in normal applications, as it provides no real functionality.

Example Application

<?xml version="1.0"?>
<!-- This file is protected by Copyright. Please refer to the COPYRIGHT file
     distributed with this source distribution.

     This file is part of OpenCPI <http://www.opencpi.org>

     OpenCPI is free software: you can redistribute it and/or modify it under
     the terms of the GNU Lesser General Public License as published by the Free
     Software Foundation, either version 3 of the License, or (at your option)
     any later version.

     OpenCPI is distributed in the hope that it will be useful, but WITHOUT ANY
     WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS
     FOR A PARTICULAR PURPOSE. See the GNU Lesser General Public License for
     more details.

     You should have received a copy of the GNU Lesser General Public License
     along with this program. If not, see <http://www.gnu.org/licenses/>. -->
<application done="file_write">
  <instance component="ocpi.core.file_read" connect="backpressure">
    <property name="filename" value="input.bin"/>
  </instance>
  <instance component="ocpi.core.backpressure" connect="file_write">
  </instance>
  <instance component="ocpi.core.file_write">
    <property name="filename" value="output.bin"/>
  </instance>
</application>

Dependencies

The dependencies on other elements in OpenCPI are:

None.

Limitations

Limitations of backpressure are:

None.

Testing

The back pressure component is tested via the OpenCPI unit test framework. The backpressure.test/ component unit test suite directory contains the XML files that describe the combination of tests.

Fundamentally, there are two test cases that are employed to verify the back pressure component:

enable_select=true: The most significant bit of the lfsr-15 drives the “take” signal of the input port.
enable_select=false: The enable_duty_cyle setting controls the duty cycle of the “take” signal of the input port.

In all test cases, the data is simply passed through the worker and the tests are determined to be successful by comparing the input and output files. Due to its simplicity and use in other tests, a binary data file is generated containing complex signed 16-bit samples with a tone at a configurable center frequency and sample frequency. Plotting of the I/O data is available, via View=1, if desired.

Component testing not completed.

Backpressure (backpressure)