Those documents are in need of a refresh.
A new utility has been created called *ocpiadmin* which facilitates
platform builds. Before invoking it
is assumed you have followed the OpenCPI Installation Guide
<
https://opencpi.gitlab.io/releases/latest/docs/OpenCPI_Installation_Guide.pdf>
.
Specifically installing vendor tools, cloning the project, running
install-opencpi.sh, sourcing environment variables. The following command
is also referenced several times in the install guide and these are the
ones you would use for xilinx19_2_aarch32:e31x platform combination:
ocpiadmin install platform xilinx19_2_aarch32
The 'ocpiadmin install platform' command will build the framework and
workers for the given platform in projects
core,platform,assets,assets_ts,tutorial, and if the platform is located in
an OSP project outside the main OpenCPI project will be against that
project as well. After building the RCC platform the next step would be to
build the HDL platform. In your case for the E310 it would be:
ocpiadmin install platform e31x -p ocpi.osp.e3xx
That command will build all the HDL workers in the same set of projects as
before. This will also pull the OSP from gitlab since it's not in the main
OpenCPI project and place it in projects/osps directory. Additionally for
HDL platforms it will build only one HDL assembly by default, the
testbias assembly.
To run the fsk_modem_app.xml you need to build
ocpi.osp.e3xx/hdl/assemblies/fsk_modem hdl assembly. To do so do the
following:
cd projects/osps/ocpi.osp.e3xx/hdl/assemblies/fsk_modem
ocpidev build --hdl-platform e31x
Once the assembly and all workers have been built there are three modes of
running an OpenCPI application:
1. standalone mode
All artifacts required for the application are on the E310.
2. network mode
E310 connected to NFS server hosted on the development host.
3. server mode
ocpiremote utility to load OpenCPI sandbox via SSH. Application
executes from the development host.
Which mode are you planning to use?
Typically you will get the 'No acceptable implementations ' error if
OCPI_LIBRARY_PATH environment variable has not been set correctly.
On Mon, Apr 12, 2021 at 9:57 PM <anonymous254367_at_gmail.com> wrote:
> The dependencies are used during the *ocpidev build* commands, correct?
>
> There is the FSK_App_Getting_Started_Guide and the
> FSK_App_Getting_Started_Guide_E31x.
>
> I followed the later guide to build the FSK application.
>
> The build commands also appear to be slightly different between the two
> guides. I have noticed that the former guide mentions *fsk_modem* in
> section *5 Build the assets project*, which is the application you
> mention is required for the e31x.
>
> Assuming that ocpi.core, ocpi.assets, ocpi.platform, and ocpi.osp.e31x
> projects have already been created:
>
> If I use the commands in the FSK_App_Getting_Started_Guide while in the
> correct directories but replace *xilinx13_3* and *matchstiq_z1* with
> *xilinx19_2_aarch32* and *e31x* respectively then the *fsm_modem*
> application will be built? Will this solve the “ERROR: No acceptable
> implementations†error?
> _______________________________________________
> discuss mailing list -- discuss_at_lists.opencpi.org
> To unsubscribe send an email to discuss-leave_at_lists.opencpi.org
>
Received on Tue Apr 13 2021 - 03:48:45 CDT