On Fri, Apr 3, 2020 at 1:54 PM Davis Hoover <dhoover_at_geontech.com> wrote:
> These tests use the ad9361_config_proxy.rcc which require setting the
> delays to a known-good value. This has been exemplified in a separate BSP
> project, which does work correctly:
>
> https://gitlab.com/opencpi/osp/ocpi.osp.e3xx/-/blob/develop/applications/ad9361_adc_test/scripts/run_app.sh#L97
> Are these values being set correctly for your platform?
>
I am setting them according to a known good set for this radio from a
different application that was run on it.
Regardless, my confusion stems from why both the ADC and DAC tests which
use the PRBS show 30% BER, but the DAC tests which do not use the PRBS but
still use the TX and RX paths show 0% BER.
My thought is that if the RX-only path doesn't work, why would the TX path?
Sorry for the confusion. Still perplexed.
Thanks,
Brian
Received on Fri Apr 03 2020 - 18:08:26 CDT